Howl Pendragon Jenkins, Sophie Hatter and Calcifer Figure - Howl's Moving Castle - Studio Ghibli

Immerse yourself in the magical world of cosplay with our 3D printed creations! From iconic props from mythical movies and series we've all seen, to one-of-a-kind pieces for your favorite cosplay, each design is carefully crafted to bring the essence of your beloved characters to real life.

This model is a Fan Art of ** Howl's Moving Castle - Studio Ghibli** , it is a Various Files model to make it more convenient to print on a small printer.

Each of the parts are sized for a 200x200x200 printer.

We recommend printing them with an inclination of 18 degrees in resin and with the supports on the flat side, for less problem at the time of printing, greater contact with the surface and less problem in the Post-processing of the pieces.

Printing recommendations (FDM)

Layer height 0.1mm

Printing speed 40 mm/s

Filling density 10%

Supports: Tree supports (CURA slicer)

Bonding platform: Skirt

Recommended print settings (FDM)

Print recommendations

Layer height 0.1mm

Print speed 40 mm/s

Infill Density 10%

Supports: Tree supports (CURA slicer)

Adhesion Platform: Skirt

Print Parameters (SLA)

Printing recommendations

Normal exposure time 2.5s

Rest time 0.5s

Base Layers 4

Supports: Combination of Light and Medium supports.

Raft: No

Recommended print settings (SLA)

Print recommendations

Normal Exposure 2.5s

Off Time 0.5s

Bottom Layers 4

Supports: Combination of Light and Medium Supports

Raft: None