TPU Ammo Sleeve by Qwerm

A five round ammo sleeve printable in TPU. It is designed to hold .308 and 6.5mm Creedmoor up to 30-06 and 7mm Rem Mag.

Orientation: Print flat on it's back.

Settings Used:

Material: TPU

Layer Height: 0.2mm

Infill Percentage: 50%

Wall Line Count: 4

Parts Needed: 1/8" Shock Cord

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/