Iron Man Bust by bayfaire

bayfaire

Art>Sculptures

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

14 h

3 plates

4.6(9)

PLA with PETG support interface

18.2 h

3 plates

Boost

114

150

422

109

Released

Description

My Free Bust of ironman which is a part of my newly created Custom Bust Series.

Check out the entire Collection of my busts here: https://makerworld.com/@bayfaire/collections/942237

I will be updating often with free and premium busts so please do follow me on Makerworld and Patreon!

Grab commercial use access to my busts at my Patreon + other premium models!

Patreon: https://www.patreon.com/Bayfaire/

Patron's also receive PNG images of all bust models to create their own previews!

All busts will follow the same base stand as this free one so you wont have to worry on reprinting and testing every time!

Some Settings information:

busts will come with a variety of models allowing you to multi-color your bust. The bust, stand, and even the text base insert portion can be printed separately and inserted into the stand.

An circular insert is placed inside the bust itself for easy assembly to the pole and the stand

Note:
Text box Insert is a tight fit with low tolerance, if you would like a more easier fit then lower size from 99% to 98% or 97% or size down the x,y,z by 1mm on each side

Added STl's to print the entire bust in 1 go and split parts of the bust as well.
Textbase_insert.stl works on all of the bust models

Comment & Rating (13)

@SaxManEric

First, this is an incredible model. BUT! It was not really made with FDM printing in mind, so remember that when printing. There should not be all the openings in the model that require supports 'inside' the model. When taking supports off, pieces of the armor literally fell off easier than the supports (the piece over the stomach particuarly). Bayfaire: if you re-do this for the free version here, I would think it would be easy enough to just close all the openings up. It shouldn't affect the look and would be a great FDM print (more like your Hulk bust). This one and Batman Arkham are nearly unusable as-is for FDM. Check my pics for more. Printined on P1S in newly opened an dried Sunlu Silk Silver. Another BUT! Bayfaire! Thanks so much for all your work. Regardless of these issues, the models are awesome. Keep it up!

@user_3419578103

it's decent, supports need work. I had supports inbetween and inside the armor. I can get them but can see them.

@user_1292150149

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice bust.

(Edited)

@poxx

The 3D printing on the P1S came out very well. But I still have some loose supports in the bust that I can't get out. But it doesn't matter, I don't shake the thing all the time ;-)

@LucasTAIWAN

Wwww

@whtrck

Print Profile

0.2mm layer, 2 walls, 15% infill

awesome design

@eddiesolo

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_55330873

Print Profile

0.2mm layer, 2 walls, 15% infill

Support Issue

@tusk

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

Support Issue:The supports are all throughout and underneath the armor, it's really ridiculous. The face mask required sanding from the broken off support material. Underneath the bust is a confusing mess and I'm not even sure what I'm looking at...

Other Issues:Maybe this model works better with an SLA printer, but there are no design optimizations for FDM printing.