Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 4.1
    PLA BambuLab Basic Red Transmission Distance: 4.7
    PLA BambuLab Basic Yellow Transmission Distance: 8.4
    PLA BambuLab Basic Jade White Transmission Distance: 4.4

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #13 (1.12mm) swap to Yellow
    At layer #19 (1.6mm) swap to Jade White for the rest.