1:24 Gas Station Island with light option

IMPORTANT!!

This model was created to go along with my Texaco Gas Station. But you can use this model with other brands like Gulf, Esso, 76, Standard Oil, Shell, etc. Because there is no branding. If you wanna make it extra detailed - you can put on a sticker. Happy printing :)

Why you should buy this model:
This model looks really nice along with 2-3 gas pumps next to your model cars. If you wanna add lighting to the Island. You can do that. If not, it will still look good. You can extend the beams if you want the light bar to work with bigger pumps in example Visible Gas Pumps

The tolerance between the holes and the shafts are made for a tough fit. The parts will not break but you will have to massage it.

Lighting: Use lighting that has very thin wires. I have an example of the one I used in the photos. Use something similar.

Battery position: If the battery box is small enough. You can put it in the Lubester. If it is too big. Then run the LED wire through the pump Island base.

When you put the STL files in the slicer. Find a solution that works best for you. When printing the beam - I recommend using Brim. Otherwise it will be hard to print.

For best result: Don´t put the printing speed at 100%. This will increase the risk of print failure.