NOTE: If you change its size, manipulate it without changing the z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 1
    PLA BambuLab Basic Red Transmission Distance: 4.7
    PLA BambuLab Basic Yellow Transmission Distance: 8.4
    PLA BambuLab Basic Jade White Transmission Distance: 4.4

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #11 (0.96mm) swap to Yellow
    At layer #18 (1.52mm) swap to Jade White for the rest.