mickey mouse easter - HueForge by lucamoretti86

lucamoretti86

Art>2D Art

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.08mm layer, 1 walls, 100% infill

Designer

3.8 h

1 plate

4.9(27)

126x126 - 0.08mm, 2 walls, 100% infill - for the A1 mini

2.2 h

1 plate

5.0(1)

Boost

221

266

604

144

Released

Description

Model

Do NOT adjust the size in your slicer!! The layers will not come out right.

Do not change the size, this will cause errors in color change compromising the entire print.
Use my print profile or you will not get the desired results.
It can be printed safely without AMS and on any printer.
I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!

Nozzle: 0.4

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Jade White
At layer #16 (1.36mm) swap to Charcoal
At layer #18 (1.52mm) swap to Gray
At layer #20 (1.68mm) swap to Sakura Pink
At layer #26 (2.16mm) swap to Jade White for the rest.

Comment & Rating (40)

@sage117

Print Profile

0.08mm layer, 1 walls, 100% infill

A couple rogue white spots but used finger nail and snippers to clean up. I cut off extra part of image and like just the egg part better.

The designer has replied

@lucamoretti86

I also noticed the white spot but I also removed it with my nail in a second...unfortunately it wasn't visible during the slicer phase. thanks for the support

@Leif3D

Print Profile

0.08mm layer, 1 walls, 100% infill

Printed great. I used Sunlu Sakura Pink because I still had a roll of it, but that was very subtle. Would recommend more vibrant pink filaments than what I've used.

@als.adamo

Il mio primo HueForge ed è venuto benissimo a parer mio!

@LizzyPrintsCrea

Print Profile

0.08mm layer, 1 walls, 100% infill

Didn't have the right colours but thought I'd give it a go anyway. Really pleased with the result. SUNLU black and white, Bambu magenta and Prusa grey.

(Edited)