MILWAUKEE M18 HIGH OUTPUT 6.0/8.0AH BATTERY RUBBERIZED MAGNETIC BASE

Custom Designed and 3d printed Rubberized Magnetic Battery Covers for the Milwaukee M12 and M18 common battery sizes. Each tool was created by 3d scanning the battery packs and using them as a mold to make a perfect fit on the batteries. They are made out of Thermoplastic polyurethane (TPU) which is flexible and will give a rubber protection to the batteries as well. Each Magnetic base is fitted with two 150lbs holding power rare earth neodymium magnets. This gives exceptional holding power even when horizontally positioned. I added multiple files. each one with a different amount of magnet spots. Ranging from 3 magnet spots to 6 magnet spots to customize your holding power. Bigger heavier tools I recommend the 6 magnet base.
THESE ARE NOT REPLACEMENT BATTERY COVERS/SHELLS! THIS IS A FLEXIBLE BASE THAT IS A SNUG FIT OVER THE STOCK MILWAUKEE BATTERY SHELL.

YOU WILL NEED TO PURCHASE 3-6 - 7MM X 36MM 150LB HOLDING POWER NEODYMIUM MAGNETS.. LINK BELOW OF WHAT I'VE USED.

https://www.amazon.com/gp/product/B0CD7C58MD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

-M18 High Output Model Fits only fits Milwaukee's M18 high output XC 6.0 and XC8.0 battery.

Please Note: These have all been tested out and the batteries and magnets fit snugly. If you print and they do not fit snugly you may need to dial your printer in to tighter tolerances.

95A TPU Recommended( I use Inland and Sainsmart)
.28 Layer Height
20% Infill
3 wall count minimum
Tree Supports to build plate only - for my logo and the back of the unit(If your printer does well with overhangs it may not be necessary)