X1C LED Raiser für COB LED Strips.
Höhe 15 mm
Ich habe diesen Raiser für COB LED entworfen, weil ich die LED nicht festkleben wollte. Bei dieser Variante werden sie einfach durch die rechte hinterere Ecke eingeführt und durch die Führung gehalten. Das Ende wird ebenfalls wieder nach außen geführt und dann einfach abgeschnitten
Zur einfacheren Montage empfehle ich erst die LED durch alle vier teile zu schieben und diese erst danach zu verbinden.
Verwendete LED mit Fernbedienung:
https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details
Die Eckteile müssen mit Support gedruckt werden
--------
X1C LED Raiser for COB LED Strips.
Height 15 mm
I designed this raiser for COB LEDs because I didn't want to glue the LEDs in place. In this version, they are simply inserted through the right rear corner and held in place by the guide. The end is also guided outwards again and then simply cut off
For easier assembly, I recommend first pushing the LED through all four parts and only then connecting them.
Used LED with remote control:
https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details
The corner pieces must be printed with support