Hueforge picture of an Easter Bunny 3D printing Easter Eggs. Idea by JS Design, picture is AI generated. Fits on an A1 Mini, don´t use a prime tower. Color of the frame can be set how you like it. Hueforge Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4.4
PLA BambuLab Basic Jade White Transmission Distance: 5.6
Swap Instructions:
Start with Black
At layer #3 (0.36mm) swap to Red
At layer #12 (1.08mm) swap to Jade White for the rest.