Elven Princess of the Forrest - Set of 3 Bookmarks
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #13 (1.12mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.