Just in time for Easter!
The battle of the century!
Zombie Jesus VS The Easter Bunny!
My First Hueforge attempt……
I don't have a AMS, so I did it the old pause and swap method.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Red Transmission Distance: 4
PLA Silver Transmission Distance: 3
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Silver
At layer #19 (1.6mm) swap to White for the rest.