The SLOT Boomerang is a sleek and innovative boomerang designed for 3D printing enthusiasts. With a total length of 50 cm and a thickness of 4 mm, it's optimized for durability and performance. Crafted to mimic the shape of the symbol Pi with an additional protrusion, this boomerang features a unique groove-shaped slot running along its length.
For 3D printing, it's recommended to use lightweight yet sturdy materials such as PLA (Polylactic Acid) or PETG (Polyethylene Terephthalate Glycol). These materials offer excellent strength-to-weight ratios and are widely compatible with most consumer-grade 3D printers.
When printing the SLOT Boomerang, consider using a layer height of around 0.2-0.3 mm for a balance between print speed and surface quality. Additionally, ensure proper cooling settings to minimize warping and improve overhang performance, especially around the edges of the slots.
To maximize the boomerang's aerodynamic performance, print with a high infill density (around 20-30%) to ensure structural integrity while keeping the overall weight low. It's also recommended to print with a higher wall count (3-4 walls) to enhance rigidity and durability.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.