Green Cat Astronaut - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to BambuLab Green
At layer #10 (0.88mm) swap to Pure Yellow
At layer #18 (1.52mm) swap to White for the rest.