Adjustable graphic card support bracket LED light
Copyright Claim
Adjustable graphic card support bracket LED light
Boost
14
6
1
Print Profile(2)
0.16mm layer, 2 walls, 15% infill
Designer
1.5 h
1 plate
0.16mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
Boost
14
6
1
0
13
0
Released
Description
- Video card support with LED lighting.
- Can be assembled in up to 5 colours due to the separate parts.
- The "window" is printed in transparent material on the front.
- Designed with a rubber disc for the bottom.
- The LED strip can be fixed to the inside with a double-sided adhesive strip.
- The rod can be snapped together, it does not need to be glued together, but it must be glued to the base.
- There are two versions of the horizontal adjustable bracket, please see the last picture.
- The rod can be used as you like with the led strip going in at the top or the bottom depending on how you rotate.
- 14-15 cm LED strip is enough. Plus wire tot he motheroard.
- For the horizontal support it is recommended to allow the support because of the hole, otherwise it is not necessary.
- PETG is recommended, PLA is not
Comment & Rating (1)
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld