This is a Wall Art representing the imposing Statue of Liberty.

I prepared two profiles: one for the hueforge image and one for the other pieces.

It is splitted in 3 parts: The Hueforge photo of the Statue of Liberty, the frame and the four edge blocks.

It can be hanged on the wall with normal nail.

You can print it and bring the greatness of the Statue of Liberty inside your house, directly on your wall!

If you want to make your own print of the hueforge file, please follow the instructions:

- Start with Black

- At Layer 7 (0.64 mm) swap to dark grey

- At layer 12 (1.04 mm) swap to light grey

- At layer 18 (1.52 mm) swap to white for the rest of the print

NOTE: To print the Hueforge correctly, be sure to set 0.16 mm first layer, 0.8 mm other layers, 1 walls and 100% infill.

I hope you will enjoy it… and Happy Printing!