Hi! This is a hands-free self-watering pot for you to use indoor or outdoor, and it is very easy to leave out somewhere an forget about for a bit. Of course, a plant needs some type of light source and soil to grow still, but other than that and the water, it requires very little maintenance. This should be a super easy print, I was able to print this on an Ender-3 and it printed beautifully. The length and width of the wide part of the actual pot is about 108 mm in diameter and the height of the pot is about 165 mm. For the water reservoir, the length of the wider part is about 130 mm in diameter while the height is about 174 mm. I hope you enjoy printing this as much as I did making it!