Cargo/container ship model kit card. 15 cm (~6 in) in length. Need glue!!! Superglue works if printed in PLA. No AMS needed. I'm a ship model person and designed this model because I think cargo ships offer the most possible customization among all ship types. This model is inspired by a cargo ship model I made when I was an elementary student. Ah… it was the good old days…

Note: V2 is here! It reduced bollard and hoist parts from 14 to 2, and they are no longer tiny pieces! Thanks @xipefe for your feedback! If you downloaded the model on or before 2024/03/20, depending on your time zone, you may have V1. If you haven't assembled the front and back deck, I highly recommend you reprint the deck and bollard plates to save yourselves some assembly time.

The cargo/containers the ship carries can be customized by printing the container plates in different colors/numbers. I included a plate that has 2 big blocks. I call them cheater blocks because if you surround them with normal containers, you won't see them, and they help to save material and printing time when compared to printing normal containers. To fill the ship with normal containers (no cheating blocks), you need 12 container plates. I included a separate print profile with 3 normal container plates (45 containers total) if you want to print more containers. Feel free to skip parts if you need fewer containers.

Printing the last 2 plates of the main print profile will get you a water line base for the ship. They are optional.

Here is an equation to fully load the ship: 168 (total containers) ≤ 24 x (Number of cheater block plates) + 15 x (Number of normal container plates)

You can reference my pictures above when assembling the ship. I have also created a detailed instruction on how to construct the bridge and front deck at the end of this lengthy description. I have built the ship 4.5 times, and any feedback, such as ratings and comments, would be greatly appreciated!

集装箱船模型 组装卡。15 cm 长。需要用到胶水。如果用PLA打印的话，一般的502就行。此模型不需要AMS。做船模是我的一个爱好，整了个这玩意儿因为我感觉集装箱船是最能按个人喜好拼装的船只类型。灵感来自我小学时候劳技老师送我的一艘集装箱船模型，唉，童年啊。。。

第二代升级款已发布在此。@xipefe的评论点醒了我，第二代把系缆柱和卷扬机的零件数从14降到了2，在不影响观感的情况下把琐碎的零件结合成两块大的零件！如果您已在国内2024/03/20早7点前打印/下载此模型，您的应该是一代。如果还没安装前后甲板的话，强烈建议重新打印新款的甲板和系缆柱盘。这样可以帮您省去一点安装时间。

船上的集装箱的颜色和位置可以按喜好摆放。要多色的集装箱可以把集装箱那板多打几种颜色。我附带了一板大的集装箱。我称它们为作弊砖块。把它们藏一堆正常的集装箱里就看不见了，可以省点时间和材料。在不使用作弊砖块的话，满载状态需要打印12板正常集装箱板。

最后两板是水线底座。按需打印。我加了一个打印配置，专门用来打印集装箱的。一次能打3板集装箱（总共45个）。不用那么多的话，请使用跳过零件功能。

满载状态要打的板件的公式：168 （集装箱总数）≤ 24 x 作弊砖块板 + 15 x 正常集装箱板。

安装的时候可以参考我最上方的图片。下面是一个更具体的舰桥和前甲板安装指南。这个模型我自己已经试组了4.5条了，求各位的反馈，打分评论都行，感谢！

Bridge & Back Deck 舰桥&后甲板

Front Deck 前甲板

Special instruction for V1 第一代保留指南