My experimentation with hueforge continues. I generated an optical illusion, I prepared it with hueforge and this is the result. I'm waiting to receive a 0.2 nozzle for these prints but already with the 0.4 the effect is very beautiful.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White for the rest.