Ultimate Bolts, Screws, Nuts, and Washer Set M6
Copyright Claim
Ultimate Bolts, Screws, Nuts, and Washer Set M6
Boost
75
135
10
Print Profile(2)
0.16mm layer, 4 walls, 30% infill
Designer
1.8 h
1 plate
0.16mm layer, 4 walls, 30% infill
Designer
1.9 h
1 plate
Boost
75
135
10
0
189
54
Released
Description
Metric M6 Screws/Bolts/Nuts/Washers
These models are optimized for FDM 3D printing and should fit without the need for rescaling.
No supports needed if you print them standing.
They are still compatible with standard metal bolts/nuts.
For better strength, try printing them with a few more wall lines.
Smaller layer heights result in better threads.
DIN 933 Hexagon head screws
DIN 934 Nut
DIN 1587 Cap Nut
DIN 315 Wing Nut
DIN 125 Washer
DIN 9021 Washer
Other sizes:
Recommended Print settings:
-PLA/PETG/ABS/PA/PC depending on the use case
-0,16mm layer height or smaller
-minimum 4 wall lines
-4 top an bottom layers
-30% Infill
Comment & Rating (10)
All
A1 mini profile please
The designer has replied
1
Reply
I added a profile for the A1 mini.
Have fun :)
1
Reply
Replying to @ngprint
Thanks so much!
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
No problems printing. The result is not the strongest, but that is not a fault of the print profile
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
thanks for sharing. printed several up to stock up emergency parts kit
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
1
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
1
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
Strength Issue
Other Issues:tried 3 different filaments and they all ended up with flaws, stringy and very weak support strength.
poorly fitted also. very sticky with oil and not don’t want to have to oil them
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld