I have bought many shower back scrubbers/brushes over the years. None really worked to my satisfaction. Either they were not easy to reach or not easy to scrub. Some were not strong enough while some were too harsh on the skin. So I designed this one and I am happy with it.

This model is designed to be used with an exfoliating glove or mitt which is readily available in stores and online. With an overall length of about 20 inches (500mm), curved handle and angled head, it is easier to reach and scrub. The hook at the end of handle allows it to hang over shower wall for quick drying to prevent mold and odor. The exfoliating glove or mitt provides a deeper cleaning while not scratching the skin. Use it once or twice a week to have that deep clean feeling.

Easily printed with PETG without support. Please use the provided print profile so as to ensure all the parts have the right strength. Not all parts have the same print setting, for example, the connect bar is printed with 5 walls and 100% infill while others printed with 4 walls and 25% infill.

Note: 1) The actual print time is about 3 hours less than what’s shown on the print profile because there are two versions of head in it, one for using an exfoliating glove and the other for using a mitt; 2) Sometimes when slicing Plate 1 there is a warning message about the handle STL having floating cantilever, while another message says slice ok. I have never had any issue printing the handle during testing regardless of the warning message.

The model will not fit on small printers such as a Bambu Lab A1 mini.

Easy no-tool assembly. Assembly instruction is provided for download.