A women walks towards a volcano, her dress made of pure fire. 

Measures 200mm x 200mm.

The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below.

If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 5.5
PLA BambuLab Basic Jade White Transmission Distance: 6

 

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Jade White
At layer #14 (1.2mm) swap to Black
At layer #15 (1.28mm) swap to Red
At layer #20 (1.68mm) swap to Yellow
At layer #24 (2mm) swap to Jade White for the rest.

Source image generated with AI ∙ March 2024