I found a really great Hydroponic tower on https://www.printables.com/model/720081-modular-hydroponic-tower

This is a project remixed by https://www.printables.com/@blove_45981

I am doing my best to credit the designer as per the rules of the licensing from his original post.

This is a quick project set up to help you get printing as quickly as possible with some custom settings i applied to assist with quality of the PETG. I personally used Bambu Labs PETG Basic so your results with other types and brands of filament could effect your results. Please note There is a 5 gallon bucket adaptor kit as separate project at “place link here”

Things you will need

Bambu PETG Basic filament in various quantities. I used roughly a spool and a half. A lighter colour won't hold as much heat as black which is a good or bad thing depending on your needs.

3/8" ID 1/2" OD Clear Vinyl Tubing

5 gallon bucket

some kind of Submersible Pump

grow cups to house your plants or use the “single use” ones in the print file.

Growing media such as Rockwool

Water and nutrients

PH test Kit

pH up and down chemicals.

Please Rate this project and let me know how it turns out.