This is a simple frisbee golf disc. It's modeled to be a driver but is a little draggy for a long flight. Still fun to play around with though. This works best as a TPU print, with tons of walls to get the weight into the 178g range. You can definitely do a PLA or PETG print, but I wouldn't expect it to last a long time.

Its set up to be 210mm, but the easy to print wall/rim will definitely be a little draggy and take a little velocity and distance off the disc.

The Bambu logo (and "Driver - 210mm" text) is inset on the main face where you can paint it in Bambu Studio/Orca/PrusaSlicer. This works best using the paint bucket tool in Bambu Studio (found by hovering over the text/faces). Note, as this is a TPU print, it would be ideal to use a second TPU for the different face colors (if you want to use the extra faces). The extra faces for different colors are only 0.01mm deep, so if you choose not to use them it will still be perfectly flat.