Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Black Transmission Distance: 0.6

Swap Instructions:
Start with Ivory White
At layer #12 (1.04mm) swap to BambuLab Green
At layer #16 (1.36mm) swap to Black for the rest.

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.