This is an original image I created. Not a download from google or stolen image.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA PolyTerra Muted White Transmission Distance: 0.5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.6
PLA BambuLab Matte Ivory White Transmission Distance: 3.2

Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Dark Red
At layer #11 (0.96mm) swap to Marine Blue
At layer #16 (1.36mm) swap to Muted White
At layer #19 (1.6mm) swap to Mandarin Orange
At layer #23 (1.92mm) swap to Ivory White for the rest.