This is an original piece, not downloaded off google images.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 1.5
PLA BambuLab Basic Blue Gray Transmission Distance: 2.9
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA Sunlu Matte White Transmission Distance: 5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.2

Swap Instructions:
Start with Sapphire Blue
At layer #5 (0.48mm) swap to Charcoal
At layer #6 (0.56mm) swap to Scarlet Red
At layer #10 (0.88mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Lemon Yellow
At layer #20 (1.68mm) swap to White
At layer #21 (1.76mm) swap to Latte Brown
At layer #24 (2mm) swap to Ivory White for the rest.