Rotary Daily Pill Organizer, Morning/Midday/Eve

Copyright Claim

Rotary Daily Pill Organizer, Morning/Midday/Eve

Boost
0
1
0

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm / Variable Layer, 3 walls, 25% Gyroid infill
0.2mm / Variable Layer, 3 walls, 25% Gyroid infill
Designer
18.9 h
2 plates

Boost
0
1
0
0
2
0
Released

Description

A daily organizer for your pills, with three compartments per day for Morning / Mid-day / Evening (+ closed). Great to have at your desk or on an end table to remind you to take your pills. Compartments are large enough to store plenty of pills.

 

Notes:

  • Leading edge of each pill compartment is designed to be easily painted with different colors in Bambu Studio with the paint bucket tool. Default colors in the included Print Profile (3mf) are Yellow/White/Navy.
  • Assemble without glue the first time, following the instructions below. Test the operation of the daily cylinders, and if there is any binding or if they are difficult to rotate, you can use the Sanding Cylinder to smooth out the top internal surfaces of the Bottom Shell. Just wrap the Sanding Cylinder with a strip of ~220 grit sandpaper, insert into Bottom Shell, and rotate back and forth.

Assembly:

  1. Set Top Shell, upside down on a flat surface.
  2. Nest Daily Cylinders into the Top Shell.
  3. Slide Bottom Shell over the Daily Cylinders, starting at the Sunday end and then the Saturday end (you can gently pull outward on the tab at the Saturday end of the Bottom Shell to make it easier to slide over the Saturday cylinder).
    Use a light application of glue of your choice on the mating surfaces and the Pins/Pin Holes on each side. I used Super Glue on the Pins/Pin Holes and Gorilla Clear Glue on the mating surfaces, and I used painters tape to wrap the assembly while the glue cures.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more