The pack consists of 4 puzzles, each with 49 pieces. Together 196 pieces.

Rapha:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #21 (1.76mm) swap to Jade White
At layer #26 (2.16mm) swap to Red
At layer #30 (2.48mm) swap to Jade White

For the Last 2 Layers swap to Red.

Michey:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #21 (1.76mm) swap to Jade White
At layer #26 (2.16mm) swap to Orange
At layer #30 (2.48mm) swap to Jade White

For the Last 2 Layers swap to Orange.

Leo:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #20 (1.68mm) swap to Jade White
At layer #24 (2mm) swap to Blue
At layer #30 (2.48mm) swap to Jade White

For the Last 2 Layers swap to Blue.

Donni:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #21 (1.76mm) swap to Jade White
At layer #24 (2mm) swap to Purple
At layer #30 (2.48mm) swap to Jade White

For the Last 2 Layers swap to Purple.

Store: https://thinkto3d.etsy.com

Donate: https://paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8

Commercial license: https://patreon.com/Think_3D/membership