I was looking for a simple box with a magnetic lid. I did not find a fitting one, therefore I designed this one.

The dimensions of the closed box are 180 mm x 100 mm x 30 mm.

There are 8 round magnets 3 mm x 5 mm for the lid and 6 rectangle magnets 10 mm x 30 mm x 1 mm as wallmount needed.

The second version of the box is without opening for the wallmount magnets.

Print seetings:

Material: PETG

Nozzle: 0.4 mm

Layerhights: 0.2 mm

Supports: yes (Interface layer in PLA for easier removal)