DIY headphone stand with RGB light and interchangeable diffuser.
If you use the 3mf file, it is printed in three main pieces, or four pieces if you do not. If you decide to use the raw files, make sure you load the two base pieces together and choose to combine them or not if you don't have an AMS. Also, when printing the base, I used supports for the inner wall because I made the white diffuser layer less thick than the other color. I also used glue to attach the two main pieces together after I added light.
Use whatever RGB strip you would like. I use just a basic TV backlight RGB stip from Amazon.
I'm still learning basic 3d modeling, so please let me know any tips to improve it.
layer height at 0.2
10-15% gyroid infill
2 walls
Stock bambu PLA settings
make sure you have good bed adhesion
Added a brim to the Diffuser strip to be safe (optional)