XXL X1C/P1S Filament "Poop" Chute - Screw Mounted
Copyright Claim
XXL X1C/P1S Filament "Poop" Chute - Screw Mounted
Boost
66
101
31
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
5.1 h
1 plate
Boost
66
101
31
9
230
193
Released
Description
XXL-Version
I have only a few centimeters/inches behind my X1C-printer available. As a result, I designed a filament “poop” bucket with smaller dimensions. This bucket can be mounted via the shipping screws.
For larger prints with a fair amount of filament changes, more volume is needed. This bucket ensures that.
A medium version can be found here.
An additional chute and deflector can be found here.
Bucket dimensions:
HxWxL: 160x60x160 (mm)
Screw hole: 3,5mm radius
Wall: 1,2mm
Filament needed:
35,25 meter
111,93 grams
Print time (X1C):
Prepare time: 7m56s
Model printing time: 4h59m
Total time: 5h7m
Comment & Rating (31)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
nice and well printed!!!
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
perfect fit
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Been working sweet for me. Thank you.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
turned out great! I added a couple of little magnets to compliment the fit.
never liked those poop shootz with a slide around the corner. thanks for the model 🙏🏽
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
printer perfectly
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
aucun soucis d’impression
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed well, and does the job nicely.
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
the best for me printed in clear petg
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
great addition to the Bambu Lab P1s holds a lot of PLA poop
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
printed perfectly.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld