I made this to change the look of the 19oz (562ml) CeraVe Daily Moisturizing Lotion bottle.
Now your need for daily moisturization doesn't have to conflict with your dark aesthetic!
Conceal that unsightly lotion bottle by sealing it in its own tomb!
There are 3 Parts (now 5, see update at bottom) to print if you want the full package, concealing all of the original bottle and cap like I did. Or you can just print the main part. You shouldn't need to unscrew the pump from the bottle in order to install the topper part, but you may choose to. The topper-topper (smallest ring part) carefully can be bent/twisted into place for installation and removal.
Printed With Bambu PLA Matte (gray and black), and Polymaker Polylite PLA (black) on a Bambu Lab P1S, with the following layer heights:
Update 4/06/2024:
There are now optional text inlays that you can use a narrow tool (such as a small flathead screwdriver) to press into the stone “engraving”. These make the build really pop without needing to fill the gaps with something else. It's not meant to be a perfect fit (embracing the old, weathered stone inspiration).