MGN12H G5 Precision Piezo Grove mount X-carriage

Since Thingiverse is not usable any more I created a copy of the project on myminifactory too:
https://www.myminifactory.com/object/3d-print-mgn12h-g5-precision-piezo-grove-mount-x-carriage-118322

Remixed to allow mounting grove mount hotends with Precision Piezo.
Since you can have different hotends with Precision Piezo grove mount I cut the tips of the fan ducts and made them changeable. This has additional benefit of being able to use PLA for the X-carriage and ABS for the tips. I personally use PETG for the X-carriage and ABS for tips. There are separate tips for Mosquito hotend and for E3DV6. Note that for Mosquito you will need a grove adapter to mount it.

WRT Precision Piezo, you do not need their TOP part as it is integrated in to the X-Carriage. Only part from Precision Piezo you need is a "CLAMP". I added their STL for a clamp, one with embedded supports and one without supports. You can find original ones as thing:2841681

mounting pillar allow you to attach blowers to it, ziptie your cables to it...

nozzle size1 is good for mosquito

nozzle size-long is too long for any hotend but you can cut off the part that goes on to the carriage and get to the ideal length of your hotend so you get above the nozzle height but still blowing in to the nozzle

I will maybe add few other nozzle designs, also a circular one that works with only 1 blower if you don't want to use two blowers..

kadica can go on top of the pillar so it can hold the flex shaft few cm above the G5 so that you don't have your flex shaft bending just after G5 as it can shorten it's life