Glasses Sunglasses 2 in 1 Car Clip for Sun Visor
Boost
68
137
25
Print Profile(5)
![[Dualcolor] 0.16mm layer, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US360a739d28f6a2/66369412/instance/2024-04-09_098ae3853410d.png?image_process=resize,w_100/format,webp)
[Dualcolor] 0.16mm layer, 3 walls, 15% infill
Designer
1 h
1 plate
![[Singlecolor] 0.16mm layer, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US360a739d28f6a2/66469045/instance/2024-04-09_c2eb8dea523c.png?image_process=resize,w_100/format,webp)
[Singlecolor] 0.16mm layer, 3 walls, 15% infill
Designer
41 min
1 plate
![[ASA-Version] 0.16mm layer, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US360a739d28f6a2/66469426/instance/2024-04-09_dbb82defe357c.png?image_process=resize,w_100/format,webp)
[ASA-Version] 0.16mm layer, 3 walls, 15% infill
Designer
41 min
1 plate
A1 Mini: 0.16mm layer, 2 walls, 15% infill
49 min
1 plate
Click to see more
Boost
68
137
25
3
165
122
Released
Description
New Version of my Glasses / Sunglasses Car Clip for Sun Visor
2 in 1
With Round 6x4 Magnet for Clip-On Glasses
More tenson, more Grip
with colored inserts on both sides
Can be Printed on Single and Dual Color
Comment & Rating (25)
All
Print Profile
[Dualcolor] 0.16mm layer, 3 walls, 15% infill
i printed model using only bambu PLA filament
The designer has replied
0
Reply
Cool
0
Reply
This design is awesome. I am going to try PETG next, PLA actually started to bend and dropped my glasses after the first 80f day. The top and bottom of the clip both did this.
0
Reply
Print Profile
[Singlecolor] 0.16mm layer, 3 walls, 15% infill
0
Reply
How do you add the magnet? Is it 6x4mm?
The designer has replied
0
Reply
You can put it in the inside hole
0
Reply
Replying to @icecube111
I see. Cool Thanks
0
Reply
Nice design, thanks 4 sharing. Whats the magnet for? Glasses are usually out of plastic, aren´t they? I dont get it :D
The designer has replied
0
Reply
Its for Magnetic Clip on Glasses :-)
1
Reply
Boosted
Print Profile
[ASA-Version] 0.16mm layer, 3 walls, 15% infill
printed in asa. works as a charm
0
Reply
Print Profile
[Singlecolor] 0.16mm layer, 3 walls, 15% infill
printed with ABS is Ok
0
Reply
Print Profile
[Dualcolor] 0.16mm layer, 3 walls, 15% infill
Good model, I just would recoomend to print this in ASA since my PLA one warped quite easily in a hot car
0
Reply
Print Profile
[Dualcolor] 0.16mm layer, 3 walls, 15% infill
nice
0
Reply
Print Profile
[Singlecolor] 0.16mm layer, 3 walls, 15% infill
Print quality was brilliant, I think it would be nice to have the grip on the glassed a little tighter but it works well
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld