I made this Gun Stock to use with Clay Hunt VR. It was modeled from real shotgun dimensions and it works really well for me. I printed from PLA with 5 wall layers and 50% infill for strength and weight. There are 20mm holes in the Forend, Stock and Barrels to insert extra weight.

You will also need.

2 M6x35 Cap head screws

2 M6x25 Cap head screws

2 M6x12 Pan head Screws

2 M5x20 Cap head screws

2 M5x25 Cap head screws

2 M6 Nuts

2 M6 Washers

2M5 Nuts

You will need to make 2 x 6mm threads in the controller holder this can be done with a 6mm Tap or by carefully screwing in a 6mm screw to form the threads. The same will need to be done with the one hole in the top of the front part and the one hole in the top of the centre part.

2x 5mm threads need to be made in the stock to attach the Butt Plate.

NB: The controller Holder is a re-model of a part from “meta quest 3 - Simple gun stock V1.1" by Strictsquid on thingiverse