CNC dust cover suitable for 80mm spindle.
The spindle screw is M6X25 (any length above 25 is acceptable).
The dust inlet is suitable for a 32mm tube.
The tube mouth is designed to be easily detachable, facilitating dust suction at any time.
It adopts a magnetic suction design, making it more convenient to disassemble and change tools.
The magnets are round with a size of 5X3mm.
There are a total of 20 magnets, enough to ensure stability during use without falling off.
A brush can be locked at the bottom with clips.
It effectively prevents dust from contaminating the CNC track, and house, with very good results.
Mom no longer has to worry about dust flying everywhere.