This is a fan-made mini bundle of Arlecchino's brooch, heels and hairclip from Genshin Impact. All of my models are always made from scratch by me. This is a mini accessories bundle, meaning that someone has requested I sell only a handful of specific pieces for this character. Please message me if you'd like a full bundle available for this character.
You will receive 1 zip folder that contains the 15 stl files:
The brooch which comes separated as the brooch core, 4 identical slot in brooch gems, the slot in inner diamond and 4 identical surrounding diamond models. Each brooch gem is pre-separated into 2 parts, these parts do not have pins. The brooch core and each surrounding diamond model has a single 8x3mm magnet inset in its centre so that you can clip and unclip the models to your shirt with ease. The whole brooch core is also included if you'd prefer to just print the core as one piece instead.
The ponytail hairclip. Black feathers will need to be glued onto it
2 identical sets of heel accessories which come separated as the heel core and slot in heel gem. I highly recommend gluing the heel part onto the back of an actual heel as the model is not built to be walked on alone. Adding filler in-between the model and the shoe will likely be required for a snug fit due to the varied nature of shoes.
More Info for this Product:
In total, you will need 5 magnets that are 8mm x 3mm for the magnet-able parts (surrounding diamonds and brooch core) Please also keep in mind that if you change the size of these models at all, the dimensions of its magnet insets will change too.
Some things to consider:
. These models and split parts are designed to fit on a Prusa MK3S printer build volume of 25cm wide, 21cm deep, & 21cm high.
. The included models are scaled to fit a generalised 5'7" tall person. If you would like to resize to a different generalised height (such as 5'3" or 6'0"), and are not comfortable doing it yourself, please contact me so I can do it for you!
. I will be unable to provide the models in any file format other than .stl
. I typically provide the models in a default orientation which is often not at an optimal orientation to print considering various factors, please consider the orientation of the models and adjust them accordingly. If you would like some orientation tips, please contact me.
. Before printing your final parts, make sure to do a test print, double check that the generalised sizes are right for you and re-size if needed. If you decide to resize, make sure to scale all joining parts collectively so that they will fit together. If parts have features that rely on ultra precise measurements such as dowel slots, fabric slots, or magnet insets, please feel free to contact me if you'd like to resize them so that I can do it for you while maintaining the correct size of the feature.
. Models that are pre-split into parts will likely have some degree of seam line depending on how accurately your printer prints the joining edges of the models, the pins, and the voids, as well as material expansion. If you encounter this, I recommend using some sort of filler, such as epoxy putty, to fill in the seam line and then sand everything well for smooth results.
If you have any questions please do not hesitate to contact me!
Feel free to also drop pics of your cosplays, I'd love to see what you make!
Thanks for stopping by! I hope you enjoy!