Cyno Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing

This is a fan-made bundle of cosplay accessories based off of Cyno's official art and in game model from Genshin Impact. All of my models are always made from scratch by me. If you would like just a handful of models from this bundle, please contact me so I can put together a mini bundle for you!

You will receive 1 zip folder that contains the 57 stl files:

1. The belt accessories which come separated as the belt, the belt slot in core, the belt slot in gem, and the belt slot in stud. The belt is pre-separated into 8 parts. The front 4 parts and back 4 parts are glued together to form 2 halves. These halves are Not meant to be glued together but rather are designed to have connecting material, such as elastic and or velcro, glued within so that you can take it on and off with ease, each parts alignment pins will keep it aligned correctly and support the connecting material.

2. The belt cloth end which is pre-separated into 2 parts that are designed to be glued together using their alignment pins as a guide. The model has a 0.25cm slot that goes through the middle so that fabric or thin foam can slide through and be glued within. The whole model is also included.

3. **The neckpiece which is pre-separated into 6 parts. The front 3 parts and back 3 parts are glued together to form 2 halves. These 2 halves are Not meant to be glued together but rather are designed to have connecting material, such as elastic and or velcro, glued within so that you can take it on and off with ease, each parts alignment pins will keep it aligned correctly and support the connecting material. Alternatively, you could glue all pieces together and slide the neckpiece over your head.

4. **2 identical thigh bands.

5. 2 identical sets of calf accessories which come separated as the **calf band, the calf core, the calf slot in gem and 2 identical studs. The calf band is halved into 2 parts that are Not meant to be glued together but rather are designed to have connecting material, such as elastic and or velcro, glued within so that you can take it on and off with ease, each parts alignment pins will keep it aligned correctly and support the connecting material.

6. 2 identical sets of the cloth emblem which comes separated as the main piece and circular piece.

7. 2 identical arm guards which come separated as the top piece and lower piece.

8. 4 identical cloth ends. Each model has a 0.25cm slot that goes through the middle so that fabric or thin foam can slide through and be glued within.

9. 13 identical cloth accessories.

10. The Electro Sumeru vision which comes separated as the frame and core.

More Info for this Product:

**Please keep in mind that these pre-sized pieces in particular are generalised measurements and absolutely will not fit everyone and everybody type! I highly encourage you to measure yourself and resize and adjust these pieces accordingly!

Some things to consider:

. These models and split parts are designed to fit on a Prusa MK3S printer build volume of 25cm wide, 21cm deep, & 21cm high.

. The included models are scaled to fit a generalised 5'7" tall person. If you would like to resize to a different generalised height (such as 5'3" or 6'0"), and are not comfortable doing it yourself, please contact me so I can do it for you!

. I will be unable to provide the models in any file format other than .stl

. I typically provide the models in a default orientation which is often not at an optimal orientation to print considering various factors, please consider the orientation of the models and adjust them accordingly. If you would like some orientation tips, please contact me.

. Before printing your final parts, make sure to do a test print, double check that the generalised sizes are right for you and re-size if needed. If you decide to resize, make sure to scale all joining parts collectively so that they will fit together. If parts have features that rely on ultra precise measurements such as dowel slots, fabric slots, or magnet insets, please feel free to contact me if you'd like to resize them so that I can do it for you while maintaining the correct size of the feature.

. Models that are pre-split into parts will likely have some degree of seam line depending on how accurately your printer prints the joining edges of the models, the pins, and the voids, as well as material expansion. If you encounter this, I recommend using some sort of filler, such as epoxy putty, to fill in the seam line and then sand everything well for smooth results.

If you have any questions please do not hesitate to contact me!

Feel free to also drop pics of your cosplays, I'd love to see what you make!

Thanks for stopping by! I hope you enjoy!

Designed for FDM printing

I recommend trying out the Overture PLA Pro brand of filament. Its more robust and easier to sand than other PLA brands I've tried out, and typically prints very nicely.

General Filament Printer Settings Recommendation:
(Parameters have been tested to work well with Overture PLA Pro)

. A fine layer height of 0.1mm or less for a nice and smooth surface straight off of the print bed. (This helps to minimise time spent on post processing by sanding to obscure layer lines.)

. Organic/tree supports at 45% overhang threshold and 0.2 detachable top z contact distance. (Overall they are much better in my experience than default style supports; With organic/tree supports, surface detail is better retained, they are much easier to remove, minimal marks are left behind after removal, and they tend to use less filament.)

. Infill at around 5-10% gyroid for a more durable model, or 5-10% lightning for a more lightweight model.

. x2-3 walls at 0.8mm thickness for adequately durable model walls. (A model's main strength I find comes from the number of walls and not the infill density. This in conjunction with the infill setting chosen is very dependent on how brittle/impact resistant your filament is.)