Jetfan V4
----- U P D A T E: -----
NEW XT60 Extension for those who don't own a Einhell Battery.
β¨I used these plugs:
https://s.click.aliexpress.com/e/_DBb3SAL
βββββββββββββββββββ¨
Jetfan V4 for Parkside Performance, Einhell and Lipo Batteries.β¨
Custom built Jet Fan with a 6s EDF Impeller and 2.25KG of thrust.β¨
65A @ 25,2V - 1638W Power.β¨β¨β¨β¨
What you will need:β¨β¨
40A - 60A ESC - depends on what Battery you are using:
(For Einhell 45A is the best choice, For Parkside up to 50A (for 4A)
If you have a 8AH Parkside Performance Battery you can use a 60A ESC - Please check size (slot for ESC is 39 x 14mm)
https://s.click.aliexpress.com/e/_DBBgcKZ
- only the 50A Version will fit because of the size. And everything below would have too little power and they are only for up to 4s.
https://s.click.aliexpress.com/e/_DlgcZM7
- Only ESCs up to β60A" will fit into the handle for sure! Technically the 80A ESC will fit too, but it will be a tight fit. β¨
https://s.click.aliexpress.com/e/_Dkkgu9T
β¨If youβre using a Einhell Battery Choose β40Aβ or "45A" - Which will result in 840W of power. (45A is also okay)β¨β¨
If you are using a Lipo Battery, like for drones or other RC things you can choose the β80Aβ version, this will bring you a the maximum power of the fan with 1640W @6s .Make sure the lipos can deliver this much power by calculating their βC-rateβ multiplied by their capacity. β¨β¨
if youβre not sure which ESC to buy or which Lipo you will need, leave a comment.β¨
βββββββββββββββββββ¨
What else you will need: β¨β¨6S 70mm EDF:β¨β¨
https://de.aliexpress.com/item/4000394040632.html?spm=a2g0o.order_list.order_list_main.29.79035c5fXDusDa&gatewayAdapt=glo2deuβ¨
β¨Choose β70MM KV2300 6Sββ¨
βββββββββββββββββββ¨
Button Switch:β¨
https://s.click.aliexpress.com/e/_DBUbx4D β¨β¨ββββββββββββββββββ
β¨ESP8266 Wemos D1 mini:
β¨https://s.click.aliexpress.com/e/_DDGU6qxβ¨β¨βββββββββββββββββββ¨
Some Cable Shoes to connect the battery, such as these:β¨β¨
https://s.click.aliexpress.com/e/_DBVBqCrβ¨βββββββββββββββββββ¨β¨
Potentiometer:
β¨https://s.click.aliexpress.com/e/_DCIivE5
Choose β20Kβ
β¨ββββββββββββββββββ
β¨β¨Also you will need some cables, a soldering iron, shrink tubing, and of course a Einhell, Parkside Performance Battery or a Lipo Battery.β¨β¨
βββββββββββββββββββ¨
So to get this to work properly you need to program a Nodemcu (ESP).β¨I will tell you how to connect everything together in the next step.β¨
βββββββββββββββββββ¨
The Button:
β¨- One Wire goes to GND on The ESP8266β¨
- The other Wire goes to D2
The Potentiometer:
The Middle pin needs to be connected to βA0β
The left pin also goes to GND
The right pin goes to 5V
To See which side is GND and 5V, see photo under the link below.
The ESC:
- Red goes to 5V on the ESP8266
- Black also goes to GND together with the Button
- White is connected to D1 β¨
βββββββββββββββββββ¨
You can download the Source code for the ESP here: β¨β¨
https://drive.google.com/drive/folders/1BzASm3l-gqiGU3Ut3iRNAyY0mVL5-p8g?usp=share_linkβ¨β¨β¨
βββββββββββββββββββ¨β¨
To see if the code works properly and everything is wired correctly connect your battery and press the button. β¨If the Motor starts up with a curve the code is working fine.
β¨β¨β¨β¨βββββββββββββββββββ¨
β¨Would love to see your makes.β¨β¨