Vine Sprite, or Dryad
$5.00 Vine Sprite, or Dryad
Published 2024-01-17T13:51:00+00:00
The model comes supported and unsupported.
This model can be used for:
- A Vine Blight
- A Twig Blight
- A Dryad
- Fey creature
- Forest Spirit
Thank you!
- Bryan Parry
Portfolio:
https://bryan_parry.artstation.com/albums/10282786
The 3D printer setup I use as of upload: 16 Jan, 2024
- Elegoo Saturn 3
- Elegoo Standard 8K Space Gray Resin
- Lychee Slicer Pro
Printer Settings:
Layer Height - 0.040 mm
Bottom Layer Count - 3
Exposure Time - 2.800 s
Bottom Exposure Time - 35.00 s
Transition Layer - Count 10
Transition Type - Linear
Waiting Mode During Printing - Resting Time
Rest Time Before Lift - 1.000 s
Rest Time After Lift - 1.250 s
Rest Time After Retract - 1.000 s
Bottom Lift Distance - 3.000 + 4.000 mm
Lifting Distance - 3.000 + 4.000 mm
Bottom Retract Distance - 5.500 + 1.500 mm
Retract Distance - 5.500 + 1.500 mm
Bottom Lift Speed - 65.000 & 180.000 mm/min
Lifting Speed - 65.000 & 180.000 mm/min
Bottom Retract Speed - 180.000 & 65.000 mm/min
Retract Speed - 180.000 & 65.000 mm/min
Date published | 17/01/2024 |
Price | $5.00 |
Support Free | YES |