Nichirin Samurai Sword by mail.iou

mail.iou

Toys & Games>Other Toys & Games

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

X1P1, 0.2mm layer, 3 walls, 12% infill

Designer

3.8 h

1 plate

4.8(161)

A1 mini, 0.2mm layer, 3 walls, 12% infill

Designer

4.6 h

1 plate

4.6(110)

A1, 0.2mm layer, 3 walls, 12% infill

Designer

4.7 h

1 plate

4.7(30)

Boost

771

1155

351

2.3 k

3.4 k

Released

Description

Nichirin Samurai Sword mini

This is a telescopic sword inspired by the Nichirin sword in the Japanese manga "Demon Slayer: Kimetsu no Yaiba".

This is a telescopic katana that is printed in parts and then assembled. You can choose to print different colors and strengths for different parts. The handle is capped to facilitate future maintenance and blade replacement.
However, the disadvantage of this is that the printing time will increase. If you are sure that you can print an all-in-one print, you can refer to my previous telescopic knife work Reverse Blade Sword mini:
https://makerworld.com/en/models/114630

Notice
It is recommended to use PLA+、PETG for printing.
If your filament has insufficient strength, please increase the fill overlap to more than 40%.

Assembly instructions:
1. Put the blades in order.
2. Close the handle cover.

3. Push the fastener carefully.

Comment & Rating (351)

@pandorium3d

Hello. I tried printing on PETG but always get a fail print. do u know how to fix?

The designer has replied

@mail.iou

Hello: Use the A1 series printer to print PETG. The conditions for PETG filament are relatively strict. If the heated bed cannot stick to the object and it is easy to fall off, please use dishwashing detergent to clean the PEI board. The heated bed temperature when printing Can be raised to 75 degrees and reduce travel speed.

@pandorium3d

actually it works when I print in silent mode. thanks!

@BatXDude

I'd like to know why you needed this in PETG?

@pandorium3d

Print Profile

X1P1, 0.2mm layer, 3 walls, 12% infill

one of best print! (only took videos but this is the only photo I have)

The designer has replied

@mail.iou

Thank you for your support. I have launched a new telescopic knife that is short and cute and can be Print-in-place [Small Collapsing Katana - Puppy ]. You can take a look. https://makerworld.com/en/models/405515

@pandorium3d

Replying to @mail.iou :

thank you! is there a way I can sell the swords commercially?

@mail.iou

Replying to @pandorium3d :

I give you permission to sell my models if you are willing to donate 5% of your profits to charity.

@dennis.day.58

Love how this printed on my P1S using Kingroon PLA 3D Printer Filament, Triple Color Silk PLA Filament. The quality and structure is great. As soon as I picked up from the build plate it extended.

The designer has replied

@mail.iou

Thank you for your support.

@ckimber

Hey what’s your bed temp on the pla? I’m using kingroon pla+ and when I use the cool plate I have to set it at 55c or it will not stick for me.

@KW3DP

Print Profile

X1P1, 0.2mm layer, 3 walls, 12% infill

Fun print. Printed perfect

The designer has replied

@mail.iou

@.Francesco

Print Profile

A1 mini, 0.2mm layer, 3 walls, 12% infill

Stupendous! my son likes it a lot! Congratulations for the fantastic idea!

@user_56205016

how to use diffrent colors

@user_56205016

Replying to @user_56205016 :

@RedAstaire

Print Profile

X1P1, 0.2mm layer, 3 walls, 12% infill

Gleich 2x gedruckt 😁

The designer has replied

@mail.iou

(Edited)

@KanaanCross

Print Profile

X1P1, 0.2mm layer, 3 walls, 12% infill

printed great, no issues at all!

The designer has replied

@mail.iou

@GenghisKhan39

Looks great. Don't do like me and accidentally delete a blade piece off the build plate without noticing lol. Not sure if I can extend it more, but it comes out to 27" / 69cm for me. Thanks for the great model. Gonna print 2 more for my nephews

(Edited)