"Ghost Mask" from Ghost of Tsushima
Remixed by
Copyright Claim
"Ghost Mask" from Ghost of Tsushima
Remixed by
Boost
60
119
35
Print Profile(5)
0.2mm layer, 3 walls, 15% Gyroid Infill
5.3 h
1 plate
Finer Detail 0.12mm Layer, 3 Walls, 15% Gyroid Infill
7 h
1 plate
Finer Detail & Split into 2 Halves 0.12mm Layer, 3 Walls, 15% Gyroid Infill
5.8 h
1 plate
Split into 2 Halves 0.2mm layer, 3 walls, 15% infill
4.2 h
1 plate
Click to see more
Boost
60
119
35
1
255
187
Released
Description
合并分件完成了完整面具，原作者为了方便打印，文件带上下面具的分件。
Comment & Rating (35)
All
Print Profile
0.2mm layer, 3 walls, 15% Gyroid Infill
printed this while away at work, last minute Halloween custome so I’m not gonna do any post processing. printed within a reasonable timeframe and the quality is great .
The designer has replied
2
Reply
Appreciate the comment & pics. Looks great. Have a spooktacular time! 👺
0
Reply
Print Profile
Finer Detail 0.12mm Layer, 3 Walls, 15% Gyroid Infill
printed very well. the supports were hard to remove around the teeth and one part of the tooth chipped off. that’s because the tree supports are generated inside of the teeth, if the designer wants to fix this - just color the supports around the teeth yourself and deselect the unnecessary parts.
The designer has replied
1
Reply
Appreciate the constructive feedback. Thankyou. This issue should now be fixed. 🙏
(Edited)1
Reply
Print Profile
Finer Detail 0.12mm Layer, 3 Walls, 15% Gyroid Infill
This came out very good, honestly, I can’t complain. When I woke up this morning, I did not think this would have worked, but to my surprise one of my favorite video game characters mask is now on my wall.❤️❤️❤️
The designer has replied
1
Reply
Glad it all worked out for you. Looks great. 👺
0
Reply
Print Profile
Finer Detail 0.12mm Layer, 3 Walls, 15% Gyroid Infill
this printed out well now off to paint
The designer has replied
1
Reply
Appreciate the photo and comment. Would love to see some pics once painted. 👍
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% Gyroid Infill
Printed in PETG-CF, scaled down. Top left tooth didn’t print, probably didn’t select the corrected profile since the OP said it fixed. Might try printing it again.
The designer has replied
0
Reply
Hi
Appreciate the feedback. Thankyou. 🙏
I have re orientated the model on the build plate and made a few other minor adjustments to the 0.20mm profile. Hope that helps. Good Luck with the print. 🤞
0
Reply
Print Profile
Finer Detail 0.12mm Layer, 3 Walls, 15% Gyroid Infill
sibei handsome mask but my face is too big for this 😂
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% Gyroid Infill
awesome detail!
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% Gyroid Infill
Great model, printed it with two colosrs. Stock settings, tree supports, 0.4 nozzle, 0.2 layers.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% Gyroid Infill
perfect !
The designer has replied
1
Reply
Thankyou. 🙏
(Edited)1
Reply
you did a great job now if I can only find. a cat mask or even a kitsune (fox sport)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% Gyroid Infill
(Edited)
0
Reply
Related Models
© 2024 MakerWorld