Analogue Pocket Case

ChadMikeInnis

Hobby & DIY>Electronics

GIF

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

6.9 h

4 plates

4.6(8)

Boost

106

Released

Description

UPDATE 11/13/23: Changed the design of the lock to keep it from falling out or breaking. New lock (now in two pieces) can be printed separately, at 15% infill, and is compatible with cases you might have already printed!

Check out the instructions PDF for some crucial tips on assembling, and an Amazon link to the felt liner I used on the inside.

Shapr3D file I created it with is currently a bit of a mess, but I might clean it up and make it available for others to remix at a later date.

Documentation (1)

Other Files (1)

Analogue Pocket Case Instructions.pdf

Comment & Rating (12)

@Saerian

Print Profile

0.16mm layer, 2 walls, 15% infill

Came out great ! Waiting on the felt to arrive to finish the case out. The knob snaps in place easy, but also pops out easy too. Could be because I printed in PETG. Will play with slight scaling to see if I can get one to fit better. Still a great looking case, highly recommend. Printed with SUNLU white/sky blue PETG.

The designer has replied

@ChadMikeInnis

hmm yeah, might be due to shrinkage on the PETG when it cools? noodling around with a version that would have a slightly different mechanism to hold that lock piece in place.

@Saerian

Replying to @ChadMikeInnis :

That would be cool, looking forward to it!

@ChadMikeInnis

Replying to @Saerian :

@saerian I just updated the model with a new locking mechanism, which should solve the issue and is also backwards compatible with the case you already printed!