A pretty pot holder to be attached to a rope, among the models I loaded 2 attachments, one for 8mm rope and the other for 6mm. Of rings I prepared the following diameters: 83 the most common for orchids;102,77,100,80,86. These were the ones I needed, if someone needs a different diameter, you can write it to me privately.

The passage of the rope ensures that the vase holder remains firmly attached to it.

The shape of the part that attaches to the rope was deliberately created to try to save plastic without losing strength, I recommend printing it with at least 3 layers and 25% filling.

If positioned like the black one in the photos, seen from the front, you will only see the pot with the plant without the holder.

Let me know if you like it!