Kunai Throwing Knife Basic by reptilebeats

reptilebeats

Art>Other Art Models

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Standard Profile - requires glue

Designer

41 min

1 plate

4.7(11)

Standard Profile - No Glue Required

Designer

50 min

1 plate

4.3(9)

Boost

214

216

Released

Description

Simple throwing knifes.

Two different versions of the basic Kunai throwing knife, a glued version and a friction based one, if the pins are to loose you may need to increase the scale a bit, these are currently set at a tolerance of -0.1mm

Make sure to print at 1000% infill for a better top surface

Comment & Rating (25)

@zhakryuu

Print Profile

Standard Profile - No Glue Required

The "No glue" profile actually requires glue as the plugs are pretty lose and have to ge glued anyway. the Kunai itself is beautiful, sadly this profile doesent work without trial and error scaling (yes my printer is calibrated, things usually fit perfectly)

The designer has replied

@reptilebeats

Hi this is noted on the description, unfortunately due to the nature of 3D printing I can not ensure the tolerances will be correct as this is dependant on many different variables. You only need to increase the size of the pins until you find the right fitting based on your setup.

@zhakryuu

Replying to @reptilebeats :

I guess that makes sense. I will reprint the pins and adjust my review, thanks.

(Edited)

@reptilebeats

Replying to @zhakryuu :

they should need a good hit when the tolerances are set correctly

@JF699

Print Profile

Standard Profile - requires glue

printed quick and easy. no fuss.

@ZumDag

Print Profile

Standard Profile - No Glue Required

good

(Edited)

@gagri2137

Print Profile

Standard Profile - requires glue

Mega dobrze zrobiony, ostry, dobrze lerzy w dłoni jak z csa

@TTbro

Print Profile

Standard Profile - No Glue Required

parts are a bit thinner than expected, the tip bent easily. the joining parts didnt work and slipped through the holes. making the two parts a bit thicker, and the holes a bit smaller i think itd be perfect

The designer has replied

@reptilebeats

you will need to adjust the pegs yourself as the size will be dependant on filament used and printer setup as stated in description. easiest way is to print the knife and scale up the pegs until you find the right fit

@ThatsMrDunnToU

Print Profile

Standard Profile - No Glue Required

All parts printed great! Now I just have to keep my kids from trying to stab each other with it. Thanks!

@Thri11seeker

Print Profile

Standard Profile - No Glue Required

really solid design surprisingly sharp though enough to stick into a wall or carpet if you throw it and surprisingly won't break easily in PLA if you really just wanna have a trainers kunai this works perfectly

@user_3712043783

Print Profile

Standard Profile - requires glue

cool

(Edited)