Here you can find my Christmas Rope Bauble Ornament Collection.
There are different Designs:
Two ropes - single color
Two ropes - dual color
Four ropes - single color (only the rope, if your printer is able to print it without the sphere inside)
Four ropes - dual color
Ten ropes - single color (only the rope, if your printer is able to print it without the sphere inside)
Ten ropes - dual color
I´ve printed the Two ropes - single color version with 3 perimeter, 0.2mm layer height and 20% lightning infill.
The filament is Prusament PLA Blend Viva La Bronze and i printed it on my CR10-V2 with 215° nozzle and 50° bed temperature.
I used tree supports at angle higher then 60 degree.
You will need some supports because of the rope geometry which creates a lot of overhangs.
I have only a single color printer, so hopefully someone with a multi color will share a make of the dual color versions.
Would be happy to see your makes!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.