Spare Box for Bambulab (with and without the logo) by Ciuf_Ciuf

Ciuf_Ciuf

3D Printer>3D Printer Accessories

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

4.8 h

3 plates

4.7(18)

0.2mm layer, 2 walls, 15% infill

Designer

5.8 h

3 plates

4.1(16)

0.2mm layer, 2 walls, 15% infill

5.7 h

3 plates

Boost

131

223

447

406

Released

Description

This is my spare box idea!

A small box that can be stored anywhere
All the projects I found before were too bulky, so I decided to create a small box, but one that can hold the essentials.
Simple and functional

It easily closes with its 4 clips
Option to insert various screws and parts for maintenance
Designed to hold up to 4 complete hotends

I have created two versions for the lids
One for those who don't have AMS yet and can't print in multicolor
The other one for the lucky ones who have decided to purchase it

I HOPE YOU LIKE IT!

Comment & Rating (41)

@tillmanjr

Print Profile

0.2mm layer, 2 walls, 15% infill

The model printed well on my X-1 Carbon with AMS and Cool Plate. The clips for the lid kinda drove me nuts so I snipped them off, printed a few small in-place hinges and attached them, then added a magnet and a thin metal plate opposite of the hinge side. Very happy with the result.

(Edited)

@OcularDynamic

got a link to the in place hinges, i think thats all this is really missin

@tillmanjr

Replying to @OcularDynamic :

Here you go: https://www.printables.com/model/291495-hinges-for-diy-projects They weren't truly print in place. The hinges are two pieces which snap together nicely. I positioned and mounted the hinges after I'd already snapped the two hinge pieces together then never uncoupled them, so ....

(Edited)

@OcularDynamic

Replying to @tillmanjr :

Thanks, I actually modified it to use 4 rectangle magnets (had a bunch left over from a project). Remix should be up soon as I finish printing it to verify functionality.

(Edited)

@Djomaster

Print Profile

0.2mm layer, 2 walls, 15% infill

very cool and perfect results

(Edited)

@DerStanni

Thanks! But the lid with the 4 clips is unfortunately not practical. Sits too tight and takes too much effort to open. A version without a compartment for a glue stick and a compartment for an extruder would make more sense.

@OcularDynamic

Print Profile

0.2mm layer, 2 walls, 15% infill

needs better latching mechanism but the box itself is good

(Edited)

@HunterABCZ

Print Profile

0.2mm layer, 2 walls, 15% infill

nice

(Edited)

@KolerCZ

Print Profile

0.2mm layer, 2 walls, 15% infill

Really good model and printing profile! Recommending.

(Edited)

@franceschelli

Print Profile

0.2mm layer, 2 walls, 15% infill

thanks, it looks nice

@impietro

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print, I needed a case for all the accessories and I printed this one. Printed in excellent quality ABS and well designed, I recommend it

@CeerOne_SAK

Print Profile

0.2mm layer, 2 walls, 15% infill

@john.morrison

Wanted to like, looks cool, but the glue stick is in there pretty tight (hard to remove) and there isn't a place for the hex keys or nozzle cleaners, as well as the closing clips don't work very well or fit too snugly.

The designer has replied

@Ciuf_Ciuf

For the glue, the problem can be solved by inserting a small piece of paper to extract it, I will definitely have to fix that. We all have hex keys at home, so I didn't see the need to create space for them, it's a box for spare parts, not accessories. As for the nozzle cleaners, there are four small compartments I don't see a reason to create additional holes when they can comfortably stay inside. I didn't want to complicate things, i preferred to keep it simple. You're not the only one having issues with the closing clips I will update the design in the next few days to address the problem. Thank you for your honest feedback.