Kitty cat artistic poster by Bunk.Wire

Bunk.Wire

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.08mm layer, 1 walls, 100% infill

Designer

3.8 h

1 plate

4.9(7)

Boost

160

267

731

Released

Description

Cyber cat (hueforge)

I highly suggest to find colors as close as you can, result is oustanding! It can be a poster, wall art etc- its filament painting art (hueforge) so bear in mind thats the poster rather than 3d sculpture.

Remember if you want to scale, do it only with x and y axis, z must be the same as original.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Dark Blue Transmission Distance: 0.5
PLA Kexcelled Gray Blue Transmission Distance: 2.6
PLA Overture Silk Gold Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Dark Blue
At layer #10 (0.88mm) swap to Gray Blue
At layer #12 (1.04mm) swap to Gold
At layer #17 (1.44mm) swap to Ivory White for the rest.

Comment & Rating (30)

@trzeci.eu

It's just AI generated pic to print. Don't recommend!

The designer has replied

@Bunk.Wire

Have you printed it? Why not recommend? IT went bad? ofc its AI generated, i didnt create it by myself. this one top https://makerworld.com/models/131601 yet ppl are printing it

(Edited)

@BenjDavidson90

Thanks, I thought at first that it was a statuette...

@wayfarer815

Replying to @Bunk.Wire :

I really wish MakerWorld would require hueforge prints to be explicitly labelled, and that the primary picture must be the actual print, rather than the source image. There's so much bait like this. At the time of writing, this print has 340 downloads and 8 actual prints. That's a terrible ratio. Why? Because you do everything you can to find "cool looking 3d mechanical things" and turn them into hueforges and upload the original source image as the primary picture. This print is basically just spam trying to earn Bambu giftcards.

(Edited)

@wayfarer815

This IS NOT a model of a cat, it is a PICTURE of a cat. If you are looking for a PICTURE of a cat, knock yourself out. If you expect an actual model of a cat, don't bother downloading it and giving this guy free money.

The designer has replied

@Bunk.Wire

Man relax a little bit. Its labeled as 2D art, where did i write its a model of, a cat? i did put it in corresponding label. Don't want to download it, print it, okay, just go elswhere... Jesus...

@wayfarer815

Replying to @Bunk.Wire :

Put hueforge in the title of your hueforge prints, and I'll leave it.

@Bunk.Wire

Replying to @wayfarer815 :

Of course my lord, everything you need! There are people thinking a little bit and know that 2D art means picture, not a sculpture. Turn your mind elsewhere please. Actually i am helping other people to create pictures that they want in private, without any payment so please go somewhere else.

(Edited)

@sko1234

worked fine, thank u! used: #1 Bambu Black #2 Bambu Silk Copper #3 Bambu Gold #4 Bambu White

The designer has replied

@Bunk.Wire

Great! thanks!

@dubbeglasbox

I used filament scraps in pink and silk pink. Black at the bottom and white at the last.

The designer has replied

@Bunk.Wire

Hi, i like it! Good work, Hope you like it too

@cosmith

Print Profile

0.08mm layer, 1 walls, 100% infill

Printed great. Beautiful picture!

@waelmkanna

Wow, I never expected it to turn out like this! Even though I didn't have the right color (black, blue, yellow, white), the result is still amazing. Thanks!

The designer has replied

@Bunk.Wire

Thank you for your comment, that still are there people who likes it