Superman - Hueforge Print
Copyright Claim
Superman - Hueforge Print
Boost
44
92
4
Print Profile(1)
0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
Designer
2.6 h
1 plate
Boost
44
92
4
0
106
17
Released
Description
Lovely and quick Superman Hueforge Print.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA+ Overture Dark Blue Transmission Distance: 1.8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA META Sunlu Red Transmission Distance: 4
- PLA Sunlu Beige Transmission Distance: 8.2
- PLA Default White Transmission Distance: 5
Swap Instructions:
- Start with Dark Blue
- At layer #12 (1.04mm) swap to Teal
- At layer #14 (1.2mm) swap to Red
- At layer #20 (1.68mm) swap to Beige
- At layer #23 (1.92mm) swap to White for the rest.
Comment & Rating (4)
All
Print Profile
0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
I started with black and switched to Bambulab Basic PLA Blue Gray and everything else the same
(Edited)
0
Reply
Print Profile
0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld